• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the old panes. In this instance you'll need source some plastic spacers that will help the new pane to fit correctly into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor and could be trampled under.

After the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you may think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and Upvc window repair energy efficient alternative to timber sash window. However, over time they can suffer from a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows to access the frame. Then, you can remove the hinges on the top and upvc window repair bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. You'll first need to close the window and then perform a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a upvc Window repair window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with ease it could be the hinges that are at fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is an easy process but it can be simpler if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or by improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to provide suggestions.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. Firstly the hinges, again due to wear and tear may become displaced, which causes gaps to develop where the sash meets the frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. The interlock may be misaligned. This is located on the hinge's side and may need to be cleaned. In some cases, it may be necessary to replace them.

The next most common reason for draughts are the window repair near me seals. They are prone to wear or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be positioned on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security for your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional immediately.